International

Invited book chapters

 

1.    Dong Sung Kim and Kwang W. Oh, " Cyclic Olefin Copolymer (COC) Polymer Moulding for LOC", Chapter 10 in Lab on a Chip Technology, Volume 1: Fabrication and Microfluidics by K.E. Herold and A. Rasooly (Ed.), Caister Academic Press, UK, 2009 (ISBN: 978-1-904455-46-2), pp. 139-160.

International journals

2019

  1. Byeong-Ung Park, Sang Min Park, Kyoung-pil Lee, Seong Jin Lee, Yu Eun Nam, Han Sang Park, Seongsu Eom, Jeong-Ok Im, Dong sung Kim, and Hong-Kyun Kim, "Collagen immobilization on ultra-thin nanofiber membrane to promote in vitro endothelial monolayer formation", Journal of Tissue Engineering, 2019, 9:14915
     

  2. Dohui Kim, Seongsu Eom, Sang Min Park, Hyeonjun Hong, and Dong Sung Kim, "A collagen gel-coated, aligned nanofber membrane for enhanced endothelial barrier function", Scientific Reports, 2019 10
     

  3. Hyeonjun Hong, Sang Min Park, Dohui Kim, Sung Jea Park, and Dong Sung Kim, "Grayscale mask-assisted photochemical crosslinking for a dense collagen construct with stiffness gradient", Journal of biomedical materials research part B, 2019 7
     

  4. Sang Min Park, Kyoung-pil Lee, Man-Il Huh, Seongsu Eom, Byeong-ung Park, Ki Hean Kim, Dong Ho Park, Dong Sung Kim, and Hong Kyun Kim, "Development of an in vitro 3D choroidal neovascularization model using chemically induced hypoxia through an ultra-thin, free-standing nanofiber membrane", Materials Science and Engineering: C, 2019 (104), 109964
     

  5. Seong Jin Lee, Sang Min Park, Seon Jin Han, and Dong Sung Kim, "Electrolyte-assisted electrospray deposition for direct coating and patterning of polymetric nanoparticles on non-conductive surfaces", Chemical Engineering Journal, 2019 7, 122318
     

  6. Hyeonjun Hong, Hyeonji Kim, Seon Jin Han, Jinah Jang, Hong Kyun Kim, Dong-Woo Cho, and Dong Sung Kim, "Compressed collagen intermixed with cornea-derived decellularized extracellular matrix providing mechanical and biochemical niches for corneal stroma analogue", Materials Science and Engineering: C, 2019 10(103), 109837
     

  7. Jeong-Won Lee, Jonghyeon Jeong, Donghyeon Yoo, Kwangseok Lee, Seoulmin Lee, Dong Sung Kim, Jae-Yoon Sim, and Woonbong Hwang, "Pump drill-integrated triboelectric nanogenerator as a practical substitute for batteries of intermittently used devices", Nano Energy, 2019 02(56), pp612-618
     

  8. Andrew Choi, Kyoung Duck Seo, Hyungjun Yoon, Seon Jin Han, and Dong Sung Kim, "Bulk poly(N-isopropylacrylamide) (PNIPAAm) thermoresponsive cell culture platform: toward a new horizon in cell sheet engineering", Biomaterials Sciences, 2019, 7, 2277-2287
    *This paper was selected as the front cover of the 6th issue in 7th Volume of Biomaterials Science











     

  9. Donghyeon Yoo, Seung-Chul Park, Seoulmin Lee, Jae-Yoon Sim, Insang Song, Dongwhi Choi, Hyuneui Lim, and Dong Sung Kim, "Biomimetic anti-reflective triboelectric nanogenerator for concurrent harvesting of solar and raindrop energies", Nano Energy, 2019 03(57), pp424-431











     

  10. Jaewon Yoo, Donghyeon Yoo, Seoulmin Lee, JaeYoon Sim, Woonbong Hwang, Dongwhi Choi, and Dong Sung Kim, "Extremely high and elongated power output from a mechanical mediator-assisted triboelectric nanogenerator driven by the biomechanical energy", Nano Energy, 2019 02(56), pp851-858











     

  11. Jeong-Won Lee, Jonghyeon Jeong, Donghyeon Yoo, Kwangseok Lee, Seoulmin Lee, and Dong Sung Kim, Jae-Yoon Sim, Woonbong Hwang, "Pump drill-integrated triboelectric nanogenerator as a practical substitute for batteries of intermittently used devices", Nano Energy, 2019 02, Vol.56, pp612-618
     

  12. Handong Cho, Jihoon Chung, Gunsub Shin, Jae-Yoon Sim, Dong Sung Kim, Sangmin Lee, and Woonbong Hwang, "Toward sustainable output generation of liquid-solid contact triboelectric nanogenerators: The role of hierarchical structures", Nano Energy, 2019 02(56), pp56-61
     

  13. Donghyeon Yoo, Eun Yeong Go, Dongwhi Choi, Jeong-Won Lee, Insang Song, Jae-Yoon Sim, Woonbong Hwang, and Dong Sung Kim, "Increased Interfacial Area between Dielectric Layer and Electrode of Triboelectric Nanogenerator toward Robustness and Boosted Energy Output", Nanomaterials, 2019 01, 9(1), 71;
     

  14. Sang Min Park, Seongsu Eom, Hyeonjun Hong, Jaeseung Yoon, Seong Jin Lee, Bum Chang Kim, Hyung Woo Kim, and Dong Sung Kim, "Reconstruction of in vivo-like in vitro model: Enabling technologies of microfluidic systems for dynamic biochemical/mechanical stimuli", Microelectronic Engineering, 2019 01, Vol.203-204, pp6-24

     

2018


 

  1. Kwangwok Lee, Jeong-won Lee, Kihwan Kim, Donghyeon Yoo, Dong Sung Kim, Sang min Lee, and Woonbong Hwang, "A Spherical Hybrid Triboelectric Nanogenerator for Enhanced Water Wave Energy Harvesting", Micromachines, 2018 11(9), pp 598
     

  2. Sang Min Park, Seong Jin Lee, Jiwon Lim, Bum Chang Kim, Seon Jin Han, and Dong Sung Kim, "Versatile Fabrication of Size- and Shape-Controllable Nanofibrous Concave Microwells for Cell Spheroid Formation", ACS Appl. Mater. Interfaces, 2018 10(44), pp37878-37885
     

  3. Yeong-Jin Choi, Sung Jea Park, Hee-Gyeong Yi, Hyungseok Lee, Dong Sung Kim and Dong-Woo Cho, "Muscle-derived extracellular matrix on sinusoidal wavy surfaces synergistically promotes myogenic differentiation and maturation", Journal of Materials Chemistry B, 2018 07, 45001
    *This paper was selected as the front cover of the 35th issue in 6th Volume of Journal of Materials Chemistry












     

  4. Hyeonjun Hong, Man-Il Huh, Sang Min Park, Kyoung-Pil Lee, Hong Kyun Kim, and Dong Sung Kim, "Decellularized corneal lenticule embedded compressed collagen: toward a suturable collagenous construct for limbal reconstruction", Biofabrication, 2018 07
     

  5. Sang Min Park, HyeMi Kim, Kwang Hoon Song, Seongsu Eom, HyoungJun Park, Junsang Doh, Dong Sung Kim, "Ultra-thin, aligned, free-standing nanofiber membranes to recapitulate multi-layered blood vessel/tissue interface for leukocyte infiltration study", Biomaterials, Vol. 169, pp. 22-34, 2018 06
     

  6. Xin Ning, Xueju Wang, Yi Zhang, Xinge Yu, Dongwhi Choi, Ning Zheng, Dong Sung Kim, Yonggang Huang, Yihui Zhang, John A. Rodgers, "Assembly of Advanced Materials into 3D Functional Structures by Methods Inspired by Origami and Kirigami: A Review", Advanced Materials Interfaces, 2018 07, 1800284
     

  7. Jiwon Lim, Andrew Choi, Hyung Woo Kim, Hyungjun Yoon, Sang Min Park, Chia-Hung Dylan Tsai, Makoto Kaneko, Dong Sung Kim, "Constrained Adherable Area of Nanotopographic Surfaces Promotes Cell Migration through the Regulation of Focal Adhesion via Focal Adhesion Kinase/Rac1 Activation", ACS Appl. Mater. Interfaces, 2018 10, 14331-14341
     

  8. Sang Min Park, Seongsu Eom, Dongwhi Choi, Seon Jin Han, Sung Jea Park, Dong Sung Kim, "Direct fabrication of spatially patterned or aligned electrospun nanofiber mats on dielectric polymer surfaces", Chemical Engineering Journal, Vol. 335, pp. 712-719,2018 03
     

  9. Sang Min Park, Seongsu Eom, Wonkyoung Kim, Dong Sung Kim, "Role of grounded liquid collectors in precise patterning of electrospun nanofiber mats", Langmuir, 2018 01, 284-290

     

2017


 

  1. Wonkyoung Kim, Changho Lee, Chulhong Kim, Dong Sung Kim, "Dual-mode reconfigurable focusing using the interface of aqueous and dielectric liquids", Lab on a Chip, Vol. 17, pp. 4031-4039, 2017 12
    *This paper was selected as the back cover of the 23th issue in 17th Volume of Lab on a Chip













     

  2. Seongsu Eom, Sang Min Park, Seon Jin Han, Joon Wan Kim, Dong Sung Kim, "One-step fabrication of a tunable nanofibrous well insert via electrolyte-assisted electrospinning", RSC Advances, Vol. 7, pp. 38300-38306, 2017 08
     

  3. Dongwhi Choi, Yu-Hsiang Tsao, Che-Min Chiu, Donghyeon Yoo, Zong-Hong Lin, Dong Sung Kim, "A Smart Pipet Tip: Triboelectricity and Thermoelectricity Assisted in situ Evaluation of Electrolyte Concentration", Nano Energy, 2017 08











     

  4. Wonkyoung Kim, Hee Chan Yang, Dong Sung Kim, "Wide and fast focus-tunable dielectro-optofluidic lens via pinning of the interface of aqueous and dielectric liquids", Optics Express, Vol. 25, pp. 14697-14705, 2017 06
     

  5. Dongwhi Choi, Do Wan Kim, Donghyeon Yoo, Kyoung Je Cha, Moonwoo La, Dong Sung Kim, "Spontaneous occurrence of liquid-solid contact electrification in nature: Toward a robust triboelectric nanogenerator inspired by the natural lotus leaf", Nano Energy, Vol. 36, pp. 250-259, 2017 04
     

  6. Jeong Su Lee, Hyeonjun Hong, Sung Jae Park, Seong Jin Lee, Dong Sung Kim, "A simple fabrication process for stepwise gradient wrinkle patterns with spatially controlled wavelength based on sequential oxygen plasma treatment", Microelectronic Engineering, Vol. 176, pp. 101-105, 2017 03
     

  7. Andrew Choi, Kyoung Duck Seo, Do Wan Kim, Bum Chang Kim, Dong Sung Kim, "Recent advances in engineering microparticles and their nascent utilization in biomedical delivery and diagnostic applications", Lab on a Chip, Vol. 17, pp. 592-613, 2017 02
     

  8. Seonga An, Jiwon Lim, Dongwhi Choi, Hyeonjun Hong, Hyung Woo Kim, Sang Min Park, Jong Won Rhie, Dong Sung Kim, "Fabrication of polystyrene-based multi-well screening platform for micrometer-scale surface topographies promoting stem cell functions", Microelectronic Engineering, Vol. 174, pp. 28-34, 2017 04
     

  9. Hyung Woo Kim, Jiwon Lim, Jong Won Rhie, Dong Sung Kim, "Investigation of effective shear stress on endothelial differentiation of human adipose-derived stem cells with microfluidic screening device", Microelectronic Engineering, Vol. 174, pp. 24-27, 2017 04
     

  10. Donghyeon Yoo, Dongwhi Choi, Dong Sung Kim, "Comb-shaped electrode-based triboelectric nanogenerators for bi-directional mechanical energy harvesting", Microelectronic Engineering, Vol. 174, pp. 46-51, 2017 04
     

  11. Dongwhi Choi, Jaewon Yoo, Sang Min Park, Dong Sung Kim, "Facile and cost-effective fabrication of patternable superhydrophobic surfaces via salt dissolution assisted etching", Applied Surface Science, Vol. 393, pp. 449-456, 2017 01

     

2016

  1. Hyung Woo Kim, Seonjin Han, Wonkyoung Kim, Jiwon Lim, Dong Sung Kim, "Modulating wall shear stress gradient via equilateral triangular channel for in situ cellular adhesion assay", Biomicrofluidics, Vol. 10, pp. 54119, 2016 10
     

  2. Wonkyoung Kim and Dong Sung Kim, "Gradient shadow pattern reveals refractive index of liquid", Scientific Reports, Vol. 5, pp. 28191, 2016 06
     

  3. Kyoung Je Cha, Jiwon Lim, Moon-He Na, and Dong Sung Kim, "Physically microstriped-nanoengineered polystyrene surface (PMS-NPS) for regulating cell attachment and alignment fabricated by nano-injection molding", Microelectronic Engineering, Vol. 158, pp. 11-15, 2016 06
     

  4. Jong Hyun Kim, Hyung Woo Kim, Kyoung Je Cha, Jiyou Han, Yu Jin Jang, Dong Sung Kim, and Jong-Hoon Kim, "Nanotopography Promotes Pancreatic Differentiation of Human Embryonic Stem Cells and Induced Pluripotent Stem Cells", ACS Nano, Vol. 10, pp. 3342-3355, 2016 03
     

  5. Hyeonjun Hong, Sung Jea Park, Seon Jin Han, Jiwon Lim, Dong Sung Kim, "Aquatic flower-inspired cell culture platform with simplified medium exchange process for facilitating cell-surface interaction studies", Biomedical Microdevices, Vol. 18, pp. 3, 2016 02
     

  6. Jaideep Katuri, Kyoung Duck Seo, Dong Sung Kim, Samuel Sanchez, "Artificial micro-swimmers in simulated natural environments", Lab on a Chip, Vol. 16, pp. 1101-1105, 2016 02
     

  7. Kyoung Duck Seo, Andrew Choi, Junsang Doh, Dong Sung Kim, "Synthesis of Poly(N-isopropylacrylamide) Janus Microhydrogels for Anisotropic Thermo-Responsiveness and Organophilic/Hydrophilic Loading Capability", Journal of Visualized Experiments, pp. e52813, 2016 02

     

2015

  1. Dongwhi Choi, Donghyeon Yoo, Dong Sung Kim, "One-Step Fabrication of Transparent and Flexible Nanotopographical-Triboelectric Nanogenerators via Thermal Nanoimprinting of Thermoplastic Fluoropolymer", Advanced Materials, Vol. 27, pp. 7386-7394, 2015 12
    * This paper was selected as the back cover of the 45th issue in 27th Volume of Advanced Materials













     

  2. Horim Lee, Dongwhi Choi, Dong Sung Kim, Geunbae Lim, "Capacitive Control of Spontaneously Induced Electrical Charge of Droplet by Electric Field-Assisted Pipetting", Nano-Micro Letters, Vol. 7, pp. 341-346, 2015 10
     

  3. Dongwhi Choi, Donghyeon Lee, Dong Sung Kim, "A Simple Approach to Characterize Gas-Aqueous Liquid Two-phase Flow Configuration Based on Discrete Solid-Liquid Contact Electrification", Scientific Reports, Vol. 5, pp. 15172, 2015 10
     

  4. Kyoung Duck Seo, Dong Sung Kim, Samuel Sanchez, "Fabrication and Application of Complex-Shaped Microparticles via Microfluidics", Lab on a Chip, Vol. 15, pp. 3622-3626, 2015 09
     

  5. Dongwhi Choi, Sangmin Lee, Sang Min Park, Handong Cho, Woonbong Hwang, and Dong Sung Kim, "Energy Harvesting Model of Moving Water inside Tubular System and Its Application of Stick Type Compact Triboelectric Nanogenerator", Nano Research, Vol. 8, pp. 2481-2491, 2015 08
     

  6. Ae Ryang Jung, Richard Y. Kim, Hyung Woo Kim, Kshitiz Raj Shrestha, Seung Hwan Jeon, Kyoung Je Cha, Yong Hyung Park, Dong Sung Kim, and Ji Youl Lee, "Nanoengineered polystyrene surfaces with nanopore array pattern alters cytoskeleton organization and enhances induction of neuronal differentiation of human adipose derived stem cells", Tissue Engineering Part A, Vol. 21, pp. 2115-2124, 2015 07
     

  7.  Minjae Kim, Taewan Kim, Dong Sung Kim, Wan Kyun Chung , "Curved Microneedle Array-Based sEMG Electrode for Robust Long-Term Measurements and High Selectivity", Sensors, Vol. 15, pp. 16265-16280, 2015 07
     

  8. Dongwhi Choi, Andrew Choi, Dong Sung Kim, "A capillary-based preconcentration device by using ion concentration polarization through cation permselective membrane coating", International Journal of Precision Engineering and Manufacturing, Vol. 16, pp. 1467-1471, 2015 07
     

  9. Moonwoo La, Sang Min Park, Wonkyoung Kim, Changho Lee, Chulhong Kim, and Dong Sung Kim, "Injection Molded Plastic Lens for Relay Lens System and Optical Imaging Probe", International Journal of Precision Engineering and Manufacturing, Vol. 16, pp. 1801-1808, 2015 07
     

  10. Kwang Hoon Song, Sung Jea Park, Dong Sung Kim, Junsang Doh, "Sinusoidal wavy surfaces for curvature-guided migration of T lymphocytes", Biomaterials, pp. 151-160, 2015 05
     

  11.  Kyoung Duck Seo, Byung Kook Kwak, Samuel Sánchez, Dong Sung Kim, "Microfluidic-Assisted Fabrication of Flexible and Location Traceable Organo-Motor", IEEE Transactions on NanoBioscience, Vol. 14, pp. 298-304, 2015 03
     

  12. Sang Min Park, Dong Sung Kim, "Electrolyte-assisted Electrospinning for a self-assembled, free-standing nanofiber membrane on a curved surface", Advanced Materials, Vol. 27, pp. 1682-1687, 2015 03
    * This paper was selected as the inside front cover of the 10th issue in 27th Volume of Advanced Materials













     

  13. Moonwoo La, Sang Min Park, and Dong Sung Kim, "Centrifugal multiplexing fixed-volume dispenser (C-MUFID) on a plastic lab-on-a-disk for parallel biochemical single-end-point assays", Biomicrofluidics, Vol. 9, pp. 14104, 2015 01
     

 

2014

 

 

  1. Kyoung Je Cha, Taewan Kim, Sung Jea Park, and Dong Sung Kim, "Simple and cost-effective fabrication of solid biodegradable polymer microneedle arrays with adjustable aspect ratio for transdermal drug delivery using acupuncture microneedles", Journal of Micromechanics and Microengineering, Vol. 24, pp. 115015, 2014 10
     

  2. Young Ae Choi, Dong Sung Kim, Hong In Shin, Eui Kyun Park, "SMOC1-induced osteoblast differentiation involves enhanced proliferation of human bone marrow mesenchymal stem cells", Tissue Engineering and Regenerative Medicine, Vol. 11, pp. 304-316, 2014 08
     

  3. Kyoung Duck Seo, Dong Sung Kim, "Microfluidic synthesis of thermo-responsive poly(N-isopropylacrylamide)-poly(ethylene glycol) diacrylate microhydrogels as chemo-embolic microspheres", Journal of Micromechanics and Microengineering, 2014 07
     

  4. Dongwhi Choi, Dong Sung Kim, "A zeta-pipet tip to reduce the spontaneously induced electrical charge of a dispensed aqueous droplet", Langmuir, Vol. 30, pp. 6644-6648, 2014 06
     

  5. Kyoung Je Cha, Moon-Hee Na, Hyung Woo Kim, and Dong Sung Kim, "Nano Petri dishes: A new polystyrene platform for studying cell-nanoengineered surface interactions", Journal of Micromechanics and Microengineering, Vol. 24, pp. 55002, 2014 04
     

  6. Moonwoo La, Wonkyoung Kim, Wonseok Yang, Hyung Woo Kim, and Dong Sung Kim, "Design and numerical simulation of complex flow generation in a microchannel by magnetohydrodynamic (MHD) actuation", International Journal of Precision Engineering and Manufacturing, Vol. 15, pp. 463-470, 2014 03
     

  7. Kyoung Duck Seo, Jang Min Park, Hyeonsoo Jeong, Dong Sung Kim, "An experimental investigation of mixing of carbon nanotube/polymer composite in a batch-type screw mixer", Microsystem Technologies, 2014 02
     

 

2013

  1. Kyoung Duck Seo, Junsang Doh, and Dong Sung Kim, "One-Step Microfluidic Synthesis of Janus Microhydrogels with Anisotropic Thermo-Responsive Behavior and Organophilic/Hydrophilic Loading Capability", Langmuir, Vol. 29, pp. 15137-15141, 2013 12
     

  2. Sung Jea Park, Moonwoo La, Kyoung Je Cha, and Dong Sung Kim, "Development of contaminant-free and effective micro-mixing methods based on non-contact dispensing system", Microelectronic Engineering, pp. 175-179, 2013 11
     

  3. Bong-Kee Lee, Sung Jea Park and Dong Sung Kim, "Fabrication of ionic polymer actuator with graphene nanocomposite electrodes and its characterization", Current Applied Physics, Vol. 13, pp. 1520-1524, 2013 09
     

  4. Min Jin Choi, Kyoung Je Cha, Hyung Woo Kim, Moon-Hee Na, Bong-Kee Lee, Woon Bong Hwang, and Dong Sung Kim, "Microchamber/nanodimple polystyrene surfaces constructing cell aggregates fabricated by thermoset mold-based hot embossing", Microelectronic Engineering, pp. 340-345, 2013 09
     

  5. Sung Jea Park,Bong-Kee Lee, Moon-Hee Na,Dong Sung Kim, "Melt-spun shaped fibers with enhanced surface effects: Fiber fabrication, characterization, and application to woven scaffolds", Acta Biomaterialia, Vol. 9, pp. 7719-1126, 2013 08
     

  6. Hyeonsoo Jeong, Moonwoo La, Sung Jea Park, and Dong Sung Kim, "Roll-to-flat texturing system with infrared preheating for manufacturing a microfluidic device", Microelectronic Engineering, pp. 10-16, 2013 07
     

  7. Dongwhi Choi, Horim Lee, Do Jin Im, In Seok Kang, Geunbae Lim, Dong Sung Kim, Kwan Hyoung Kang, "Spontaneous electrical charging of droplets by conventional pipetting", Scientific Reports, 2013 06
     

  8. Kyoung Je Cha, Jung Min Hong, Dong-Woo Cho, and Dong Sung Kim, "Enhanced osteogenic fate and function of MC3T3-E1 cells on nanoengineered polystyrene surfaces with nanopillar and nanopore arrays", Biofabrication, Vol. 5, pp. 25007, 2013 04
     

  9. Hyung Woo Kim, Sung Jea Park, Bong-Kee Lee, Dong Sung Kim, "Versatile graphene nanocomposite microheater patterning for various thermoplastic substrates based on capillary filling and transfer molding", Applied Physics Letters, Vol. 102, pp. 101907, 2013 03

     

2012

  1. Moonwoo La, Sung Jea Park, Hyung Woo Kim, Jae Jun Park, Ki Tak Ahn, Sung Moo Ryew, and Dong Sung Kim, "A Centrifugal Force-based Serpentine Micromixer (CSM) on a Plastic Lab-on-a-disk for Biochemical Assays", Microfluidics and Nanofluidics, Vol. 15, pp. 87-98, 2012 12
     

  2. Kwang-Sook Park, Kyung Je Cha, , In-Bo Han, Dong-Ah Shin, Dong-Woo Cho, Soo Hong Lee, and Dong Sung Kim, "Mass-producible Nano-featured Polystyrene Surfaces for Regulating the Differentiation of Human Adipose-derived Stem Cells", Macromolecular Bioscience, Vol. 12, pp. 1480-1489, 2012 11
    * This paper was selected as the front cover of the 11th issue in 12th Volume of Macromolecular Bioscience.













     

  3. Sunae Hwang, Byung Kook Kwak, Jaehwi Lee, Dong Sung Kim, Suk Tai Chang, JuHyun Park, Jonghwi Lee, "Janus Hydrogel Particles for Arterial Embolization and Their Aggregation Behavior", Macromolecular Research, Vol. 20, pp. 899-901, 2012 09
     

  4. Min Jin Choi, Ju Young Park, Kyoung Je Cha, Jong-Won Rhie, Dong-Woo Cho, and Dong Sung Kim, "Micropattern array with gradient size (uPAGS) plastic surfaces fabricated by PDMS (polydimethylsiloxane) mold-based hot embossing technique for investigation of cell-surface interaction", Biofabrication, Vol. 4, pp. 45006, 2012 10

2011

  1. Kyung Je Cha, Kwang-Sook Park, Sun-Woong Kang, Byung-Hyun Cha, Bong-Kee Lee, In-Bo Han, Dong-Ah Shin, Dong Sung Kim and Soo Hong Lee, "Effect of Replicated Polymeric Substrate with Lotus Surface Structure on Adipose-Derived Stem Cell Behaviors", Macromolecular Bioscience, Vol. 11, pp. 1357-1363, 2011 10
    * This paper was selected as the front cover of the 10th issue in 11th Volume of Macromolecular Bioscience.












     

  2. Kyoung Je Cha and Dong Sung Kim, "A Portable Pressure Pump for Microfluidic Lab-on-a-Chip Systems using a Porous Polydimethylsiloxane (PDMS) Sponge", Biomedical Microdevices, Vol. 13, pp. 877-883, 2011 10
     

  3. Seung Ho Paek, Wonseok Yang, Jong Sun Kim, Chul Jin Hwang, Young Ki Choi and Dong Sung Kim, "Microfabrication of dual-opposite electrodes inside a microchannel by means of multiphase laminar Flow with density difference", Micro and Nano Letters, Vol. 6, pp. 678-681, 2011 08
     

  4. Kyungsup Han, Sona Lee, Kyoung Duck Seo, Sung-Up Choi, Jonghwi Lee, Jaehwi Lee, Byung Kook Kwak, Hae-Jin Choi and Dong Sung Kim, "Effect of Flow Rates on Generation of Monodisperse Clay-Poly(N-isopropylacrylamide) Embolic Microspheres Using Hydrodynamic Focusing Microfluidic Device", Japanese Journal of Applied Physics, Vol. 50, pp. 06GL12, 2011 06
     

  5. Kyung Je Cha, Bong-Kee Lee and Dong Sung Kim, "Nanofabrication of Nickel Stamp for Replication of Polymer Multilevel Nanolens Arrays via Modified Two-step Anodization Process", Japanese Journal of Applied Physics, Vol. 50, pp. 06GG12, 2011 06
     

  6. Kyung Je Cha, Bong-Kee Lee and Dong Sung Kim, "Fabrication of Polymer Micropyramid/Nanolens Combined Structures Using Microstructured Nanodimpled Aluminum Stamp", Japanese Journal of Applied Physics, Vol. 50, pp. 06GG13, 2011 06
     

  7. Bong-Kee Lee, Jang Min Park, Dong Sung Kim and Tai Hun Kwon, "A Simple Fabrication and Integration Technique of Microlens for Microfluidic Lab-on-a-Chip by Overflow of UV Resin through Holes", Current Applied Physics, Vol. 11, pp. 909-913, 2011 05

     

2010

  1. Bong-Kee Lee, Jong Hyun Kim, Dong Sung Kim, Suk Sang Chang and Tai Hun Kwon, "Microfabrication of a Nickel Mold Insert by a Modified Deep X-ray Lithography Process and Its Application to Hot Embossing", Microelectronic Engineering, Vol. 87, pp. 2449-2455, 2010 12
     

  2. Jihoon Yeo, Jejun Ryu, Bong-Kee Lee, Euihyeon Byeon, Tai Hun Kwon and Dong Sung Kim, "Theoretical and experimental characterization of wettability of various nanolens arrayed polymer surfaces replicated with nanodimpled aluminum mold insert", Microsystem Technologies, Vol. 16, pp. 1425-1430, 2010 08
     

  3. Jihoon Yeo and Dong Sung Kim, "The Effect of the Aspect Ratio on the Hydrophobicity of Microstructured Polydimethylsiloxane (PDMS) Robust Surfaces", Microsystem Technologies, Vol. 17, pp. 1457-1463, 2010 08
     

  4. Jong Sun Kim, Dong Sung Kim, Jeong Jin Kang, Jong Deok Kim and Chul Jin Hwang, "Replication and Comparison of Concave and Convex Microlens Arrays of Light Guide Plate for Liquid Crystal Display in Injection Molding", Polymer Engineering and Science, Vol. 50, pp. 1696-1704, 2010 08
     

  5. Wonseok Yang, Young Gyu Nam, Bong-Kee Lee, Kyungsup Han, Tai Hun Kwon and Dong Sung Kim, "Fabrication of a Hydrophilic Poly(dimethylsiloxane) Microporous Structure and Its Application to Portable Microfluidic Pump", Japanese Journal of Applied Physics, Vol. 49, 06GM01, 2010 (June 2010).
    * The figure of this paper was selected as a cover image of this issue.
     

  6. Seung Ho Paek, Young Ki Choi and Dong Sung Kim, "Selective Microfabrication of Silver Electrodes inside a Microchannel by Multiphase Laminar Flow with Density Difference", Microelectronic Engineering, Vol. 87, pp. 1375-1378, 2010 (May 2010).
     

  7. Jihoon Yeo, Min Jin Choi and Dong Sung Kim, "Robust Hydrophobic Surfaces with Various Micropillar Arrays", Journal of Micromechanics and Microengineering, Vol. 20, 025028 (8pp), 2010 (February 2010).

     

2009

  1. Seung-Jae Lee, In Hwan Lee, Jeong Hun Park, So-Jung Gwak, Jong-Won Rhie, Dong-Woo Cho, Tae Jo Ko and Dong Sung Kim, "Development of a Hybrid Scaffold and a Bioreactor for Cartilage Regeneration", Chinese Science Bulletin, Vol. 54, pp. 3608-3612, 2009 (October 2009).
     

  2. Dong Sung Kim, Bong-Kee Lee, Jihoon Yeo, Min Jin Choi, Wonseok Yang and Tai Hun Kwon, "Fabrication of PDMS Micro/Nano Hybrid Surface for Increasing Hydrophobicity", Microelectronic Engineering, Vol. 86, pp. 1375-1378, 2009 (April/June 2009).
     

  3. Dong Sung Kim, Dong Sung (Danny) Kim, Kyungsup Han and Wonseok Yang, "An Efficient 3-Dimensional Hydrodynamic Focusing Microfluidic Device by means of Locally Increased Aspect Ratio", Microelectronic Engineering, Vol. 86, pp. 1343-1346, 2009 (April/June 2009).
     

  4. Sung Hwan Choi, Dong Sung Kim and Tai Hun Kwon, "Microinjection Molded Disposable Microfluidic Lab-on-a-Chip for Efficient Detection of Agglutination", Microsystem Technologies, Vol. 15, pp. 309-316, 2009 (February 2009).

     

2008


 

  1. Dong Sung Kim, Jong Sun Kim, Young Bae Ko, Jong Deok Kim, Kyung Hwan Yoon and Chul Jin Hwang, "Experimental Characterization of Transcription Properties of Microchannel Geometry Fabricated by Injection Molding Based on Taguchi Method", Microsystem Technologies, Vol. 14, pp. 1581-1588, 2008 (October 2008).
     

  2. Jang Min Park, Dong Sung Kim, Tae Gon Kang and Tai Hun Kwon, "Improved Serpentine Laminating Micromixer with Enhanced Local Advection", Microfluidics and Nanofluidics, Vol. 4, pp. 513-523, 2008 (June 2008).
     

  3. Bong-Kee Lee, Chul Jin Hwang, Dong Sung Kim and Tai Hun Kwon, "Replication Quality of Flow-through Microfilters in Microfluidic Lab-on-a-Chip for Blood Typing by Microinjection Molding", Journal of Manufacturing Science and Engineering ? Transactions of the ASME, Vol. 130, 021010(1-8), 2008 (April 2008).
     

  4. Dong Sung Kim, Hyun Sup Lee, Jungyoup Han, Se Hwan Lee, Chong H. Ahn and Tai Hun Kwon, "Collapse-Free Thermal Bonding Technique for Large Area Microchambers in Plastic Lab-on-a-Chip Applications", Microsystem Technologies, Vol. 14, pp. 179-184, 2008 (February 2008).

     

2007


 

  1. Dong Sung Kim, Han Ul Lee, Nam Hyo Kim, Kun-Hong Lee, Dong-Woo Cho and Tai Hun Kwon, "Fabrication of Microchannel Containing Nanopillar Arrays using Micromachined AAO (Anodic Aluminum Oxide) Mold", Microelectronic Engineering, Vol. 84, pp. 1532-1535, 2007 (May ~ August 2007).
     

  2. Hyun Sup Lee, Dong Sung Kim and Tai Hun Kwon, "UV Nano Embossing for Polymer Nano Structures with Non-Transparent Mold Insert", Microsystem Technologies, Vol. 13, pp. 593-599, 2007 (March 2007) (SCI IF = 0.673 (2006)).
     

  3. Dong Sung Kim, Hyun Sup Lee, Junghyun Lee, Sungjoo Kim, Kun-Hong Lee, Wonkyu Moon and Tai Hun Kwon, "Replication of High-Aspect-Ratio Nanopillar Array for Biomimetic Gecko Foot-Hair Prototype by UV Nano Embossing with Anodic Aluminum Oxide Mold", Microsystem Technologies, Vol. 13, pp. 601-606, 2007 (March 2007).

     

2006


 

  1. Seung Mo Lee, Hyun Sup Lee, Dong Sung Kim and Tai Hun Kwon, "Fabrication of Hydrophobic Films Replicated from Plant Leaves in Nature", Surface & Coatings Technology, Vol. 201, pp. 553-559, 2006 (October 2006).
     

  2. Dong Sung Kim and Tai Hun Kwon, "Modeling, Analysis and Design of Centrifugal Force Driven Transient Filling Flow into Rectangular Microchannel", Microsystem Technologies, Vol. 12, pp. 822-838, 2006 (August 2006).
     

  3. Dong Sung Kim, Se Hwan Lee, Chong H. Ahn, Jae Y. Lee and Tai Hun Kwon, "Disposable Integrated Microfluidic Biochip for Blood Typing by Plastic Microinjection Moulding", Lab on a Chip, Vol. 6, pp. 794-802, 2006 (June 2006).
    * This paper was highlighted and introduced in Magazine; Chemical Technology (May 23, 2006; Vol. 3 Issue 6, pp. T23, 2006) published by Royal Society of Chemistry and the paper is now freely accessed in the website of Lab on a Chip.

  4. Seok Woo Lee, Dong Sung Kim, Seung S. Lee and Tai Hun Kwon, "A Split and Recombination Micromixer Fabricated in a PDMS Three-Dimensional Structure", Journal of Micromechanics and Microengineering, Vol. 16, pp. 1067-1072, 2006 (May 2006).
     

  5. Dong Sung Kim, Hyun Sup Lee, Bong-Kee Lee, Sang Sik Yang, Tai Hun Kwon and Seung S. Lee, "Replications and Analysis of Microlens Array Fabricated by a Modified LIGA Process", Polymer Engineering and Science, Vol. 46, pp. 416-425, 2006 (April 2006)).
     

  6. Dong Sung Kim and Tai Hun Kwon, "Modeling, Analysis and Design of Centrifugal Force-Driven Transient Filling Flow into a Circular Microchannel", Microfluidics and Nanofluidics, Vol. 2, pp. 125-140, 2006 (March 2006).

     

2005


 

  1. Dong Sung Kim, Se Hwan Lee, Tai Hun Kwon and Chong H. Ahn, "A Serpentine Laminating Micromixer Combining Splitting/Recombination and Advection", Lab on a Chip, Vol. 5, pp. 739-747, 2005 (April 2005).

     

2004


 

  1. Bong-Kee Lee, Dong Sung Kim and Tai Hun Kwon, "Replication of Microlens Arrays by Injection Molding", Microsystem Technologies, Vol. 10, pp. 531-535, 2004 (October 2004).
     

  2. Dong Sung Kim, In Hwan Lee, Tai Hun Kwon and Dong-Woo Cho, "A Barrier Embedded Kenics Micromixer", Journal of Micromechanics and Microengineering, Vol. 14, pp. 1294-1301, 2004 (July 2004).
    * This paper was introduced in the textbook written by V. Hessel, H. Lowe, A. Muller and G. Kolb (Chemical Micro Process Engineering: Processing, Applications and Plants, Wiley, 2005, pp. 219-226)

     

  3. Dong Sung Kim, Seok Woo Lee, Tai Hun Kwon and Seung S. Lee, "A Barrier Embedded Chaotic Micromixer", Journal of Micromechanics and Microengineering, Vol. 14, pp. 798-805, 2004 (April 2004).
    * This paper was introduced in the textbook written by V. Hessel, H. Lowe, A. Muller and G. Kolb (Chemical Micro Process Engineering: Processing, Applications and Plants, Wiley, 2005, pp. 219-226)


     

2003

  1. Dong Sung Kim, Sang Sik Yang, Sung-Keun Lee, Tai Hun Kwon and Seung S. Lee, "Physical Modeling and Analysis of Microlens Formation Fabricated by a Modified LIGA Process", Journal of Micromechanics and Microengineering, Vol. 13, pp. 523-531, 2003 (May 2003).
     

  2. Dong Sung Kim, Kwang-Cheol Lee, Tai Hun Kwon and Seung S. Lee, "Micro-channel Filling Flow Considering Surface Tension Effect", Journal of Micromechanics and Microengineering, Vol. 12, pp. 236-246, 2002 (March 2002).

     

 

 

77, Cheongam-ro, Nam-gu, Pohang-si, Gyeongsangbuk-do, 37673, Rep. of Korea

TEL: +82-54-279-2843

FAX: +82-54-279-5912

 

 

Materials processing & Integrated Biosystems Laboratory                                                             

Department of Mechanical Engineering, Pohang University of Science and Technology