top of page

2024

  • Dohui Kim, Hyeonji Lim, Jaeseung Youn, Tae-Eun Park, and Dong Sung Kim “Scalable production of uniform and mature organoids in a 3D geometrically-engineered permeable membrane” Nature Communications, 2024, IF: 14.7

  • Trevon Badloe, Younghwan Yang, Seokho Lee, Dongmin Jeon, Jaeseung Youn, Dong Sung Kim, and Junsuk Rho “Artificial Intelligence-Enhanced Metasurfaces for Instantaneous Measurements of Dispersive Refractive Index” Advanced Science, 2024, IF: 14.3

  • Jaeseung Youn, Dohui Kim, Hyunsu Kwak, Anna Lee, and Dong Sung Kim “Tissue-scale in vitro epithelial wrinkling and wrinkle-to-fold transition” Nature Communications, 2024, IF: 14.7

  • Jinju Kwon, Seongsu Eom, Jeong Sik Kong, Dong-Woo Cho, Dong Sung Kim, and Junesun Kim "Engineered Regenerative Isolated Peripheral Nerve Interface for Targeted Reinnervation" Advanced Materials, 2024, IF:27.4

2023

​

  • Adeela Hanif, Junho Park, Dohui Kim, Jaeseung Youn, Unyong Jeong, and Dong Sung Kim, "A Stretchable and Strain-limiting, Bio-inspired Nanofiber-reinforced Microfiber for Wearable Electronics" Advanced Materials Technologies, 2023, IF:6.8

​

  • Donghyeon Yoo, Sunmin Jang, Sumin Cho, Dongwhi Choi, and Dong Sung Kim, "A Liquid Triboelectric Series", Advanced Materials, 2023, IF:32.086

​

  • Jaeseung Youn, Junyel Rhyou, Dohui Kim, Jisang Lee, Jeong-Won Choi, Tae-Eun Park, and Dong Sung Kim, "Facile and adhesive-free method for bonding nanofiber membrane onto thermoplastic polystyrene substrate to fabricate 3D cell culture platforms" Materials Today Bio, 2023, IF:10.761

​

  • Dohui Kim, Jaeseung Youn, Jisang Lee, Hyeonji KIm and Dong Sung Kim, "Recent Progress in Fabrication of Electrospun Nanofiber Membranes For Developing Physiological In Vitro Organ/Tissue Models" Macromolecular Bioscience, 2023, IF:4.6

​

  • Adeela Hanif, Dongheon Yoo, Dohui Kim, Farid Mustafayev, Sarkhan Hajiyev, and Dong Sung Kim, "Recent Progress in Strain-Engineered Stretchable Constructs" International Journal of Precision Engineering and Manufacturing-Green Technology, 2023, IF:4.2

​

  • Farid Mustafayev, Jaeseung Youn, Adeela Hanif, and Dong Sung Kim, "A perforated plate-based cell showering for uniform cell distribution over various culture substrates" ACS Biomaterials Science & Engineering, 2023, IF:5.7

Advanced Materials - 2023 - Yoo - A Liquid Triboelectric Series Adv Mater 26 2023.jpg

  • Jeong-Won Choi, Jaeseung Youn, Dong Sung Kim and Tae-Eun Park, "Human iPS-derived blood-brain barrier model exhibiting enhanced barrier properties empowered by engineered basement membrane", Biomaterials, 2023, IF: 15.304​

2022

  • Jaeseung Youn and Dong Sung Kim, "Engineering porous membranes mimicking in vivo basement membrane for organ-on-chips applications", Biomicrofluidics, 2022, IF: 3.258​

  • Andrew Choi, Hyeok Kim, Hyeonseok Han, Jae-Hyun Park, Jin-Ju Kim, Woo-Sup Sim, Seong Jin Lee, Kiwon Ban, Hun-Jun Park and Dong Sung Kim, "Sutureless transplantation of in vivo priming human mesenchymal stem cell sheet promotes the therapeutic potential for cardiac repair", Biofabrication, 2022, IF: 11.061​

  • Donghyeon Yoo, See Jo Kim, Yoonsu Joung, Sunmin Jang, Dongwhi Choi and Dong Sung Kim, "Lotus leaf-inspired droplet-based electricity generator with low-adhesive superhydrophobicity for a wide operational droplet volume range and boosted electricity output", Nano Energy, 2022, IF: 19.069​

1.

  • Jaeseung Youn, Hyeonjun Hong, Woojung Shin, Dohui Kim, Hyun Jung Kim and Dong Sung Kim, "Thin and stretchable extracellular matrix (ECM) membrane reinforced by nanofiber scaffolds for developing in vitro barrier models", Biofabrication, 2022, IF: 11.061​

​​

  • In Kyong Shim, Seong Jin Lee, Yu Na Lee, Dohui Kim, Hanse Goh, Jaeseung Youn, Jinah Jang, Dong Sung Kim, and Song Cheol Kim, "Enhanced Differentiation Capacity and Transplantation Efficacy of Insulin-Producing Cell Clusters from Human iPSCs Using Permeable Nanofibrous Microwell-Arrayed Membrane for Diabetes Treatment", Pharmaceutics, 2022, IF: 6.25​

​​

  • Hyeonjun Hong, Seongsu Eom, Seong Jin Lee, Jaeseung Youn, Dohui Kim, Hyeon Beom Chong, & Dong Sung Kim. "Multi-scale Fabrication Techniques of Collagen Hydrogel for Developing Physiological 3D In vitro Barrier Model", International Journal of Precision Engineering and Manufacturing ,2022, IF: 2.041

​​

  • Seongsu Eom, Junheui Jo, & Dong Sung Kim. "Investigation of Effects of Electrospinning Parameters on Transcription Quality of Nanofibrous Bifurcated-Tubular Scaffold", Macromolecular Materials and Engineering, 2022, IF: 2.041

2021

​​

  • Chung Won Lee, Jun Min Suh, Seokhoon Choi, Sang Eon Jun, Tae Hyung Lee, Jin Wook Yang, Sol A Lee, Bo Reum Lee, Donghyeon Yoo, Soo Young Kim, Dong Sung Kim & Ho Won Jang, "Surface-tailored graphene channels", npj 2D Mater Appl, 2021, IF:10.516

​​

  • Hyeonji Kim, Jae Yeon Lee, Hyeonseok Han, Won-Woo Cho, Hohyeon Han, Andrew Choi, Hyeonjun Hong, Jae Yun Kim, Jeong Hun Park, Sun Hwa Park, Sung Won Kim, Dong Sung Kim & Dong-Woo Cho, "Improved chondrogenic performance with protective tracheal design of Chitosan membrane surrounding 3D-printed trachea", Scientific Reports, 2021, IF:4.997

​​

  • Andrew Choi, Hyeonseok Han and Dong Sung Kim, "A programmable powerful and ultra-fast water-driven soft actuator inspired from mutable collagenous tissue of sea cucumber", Journal of Materials Chemistry A, 2021, IF:6.626  
    *This paper was selected as the inside front cover of the 29th issue of Journal of Material Chemistry A         

해삼표지.jpeg

​​

  • Dohui Kim, Seong Jin Lee, Jaeseung Youn, Hyeonjun Hong, Seongsu Eom and Dong Sung Kim, "A deep and permeable nanofibrous oval-shaped microwell array for the stable formation of viable and functional spheroids", Biofabrication, 2021, IF:11.061

​​

  • Junyeol Rhyou, Jaeseung Youn, Seongsu Eom, and Dong Sung Kim, "Facile Fabrication of Electrospun Nanofiber Membrane-Integrated PDMS Microfluidic Chip via Silver Nanowires-Uncured PDMS Adhesive Layer", ACS Macro Letters, 2021, IF:7.015 
    *This paper was selected as the inside back cover of the 22th issue in 16th Volume of Smal  

준열_표지.jpg

​​

  • Hyeon Beom Chong, Jaeseung Youn, Woojung Shin, Hyun Jung Kim, and Dong Sung Kim, "Multiplex recreation of human intestinal morphogenesis on a multi-well insert platform by basolateral convective flow", Lab on Chip, 2021, IF:7.517

​​

  • Jin Won Kim, Sun Ah Nam, Eunjeong Seo, Jong Young Lee, Dohui Kim, Ji Hyeon Ju, Sun Woo Lim, Hong Lim Kim, Hyung Wook Kim, Chul Woo Yang, Jin Kim, Dong Sung Kim and Youn Kyun Kuim, "Human kidney organoids model the tacrolimus nephotoxicity and elucidate the role of autophagy", The Korean Journal of Internal Medicine, 2020

​​

  • Seong Jin Lee, Yoojun Nam, Yeri Alice Rim, Kijun Lee, Ji Hyeon Ju, and Dong Sung Kim, "Perichondrium-inspired permeable nanofibrous tube well-promoting differentiation of hiPSC-derived pellet toward hyaline-like cartilage pellet", Biofabrication, 2021, IF:11.061

​​

  • Seongsu Eom, Sang Min Park, Dong Gyu Hwang, Hyung Woo Kim, Jinah Jang and Dong Sung Kim, "Fabrication of an align-random distinct, heterogeneous nanofiber mat endowed with bifunctional properties for engineered 3D cardiac anisotropy", Composites Part B: Engineering, 2021, IF:11.322

​​

  • Jaeseung Youn, Hyeonseok Han, Sang Min Park and Dong Sung Kim, "Arterial Internal Elastic Lamina-Inspired Membrane for Providing Biochemical and Structural Cues in Developing Artery-on-a-Chip", ACS Macro Letters, 2021, IF:7.015

amlccd_v010i011-2.jpg

2020

​​

  • Seong Jin Lee, Sang Min Park, Seon Jin Han, and Dong Sung Kim, "Electrolyte-assisted electrospray deposition for direct coating and patterning of polymetric nanoparticles on non-conductive surfaces", Chemical Engineering Journal, 2019, IF:16.744

​​

  • Donghyeon Yoo, Seoulmin Lee, Jeong-Won Lee, Kwangseok Lee, Eun Yeong Go, Woonbong Hwang, Insang Song, Sung Beak Cho, Do Wan Kim, Dongwhi Choi, Jae-Yoon Sim, and Dong Sung Kim, "Reliable DC voltage generation based on the enhanced performance triboelectric nanogenerator fabricated by nanoimprinting-poing process and an optimized high efficiency integrated circuit", Nano Energy, 2020, IF:19.069

​​

  • Hyeonjun Hong, Sang Min Park, Dohui Kim, Sung Jea Park and Dong Sung Kim, "grayscale mask-assisted photochemical crosslinking for a dense collagen construct with stiffness gradient", Journal of Biomedical Materials Research Part B-Applied Biomaterials, 2020, IF:3.405

​​

  • Kyoung Duck Seo, Sara Shin, Hee Young Yoo, Jiafu Cao, Suyoung Lee, Jin-Wook Yoo, Dong Sung Kim and Dong Soo Hwang, "Stabilizing coacervate by microfluidic engulfment induced by controlled interfacial energy", Biomacromolecules, 2020, IF:6.969

​​

  • Junhyun Kim, Sang Min Park, Dongwhi Choi, and Dong Sung Kim, "Direct fabrication of freestanding and patterned nanoporous junctions in a 3D micro-nanofluidic device for ion-selective transport", Small, 2020, IF:15.153
    *This paper was selected as the inside back cover of the 22th issue in 16th Volume of Small

small 표지논문.jpg

​​

  • Hyung Woo Kim, Jeong Su Lee, Sung Jea Park, Jong Won Rhie, and Dong Sung Kim, "Micro/nano dual-scale crossed sinusoidal wavy patterns for synergistic promotion of proliferation and endothelial differentiation of human adipose-derived stem cells", Advanced Materials Interfaces, 2020, IF:6.389
    *This paper was selected as the front cover of the 10th issue in 7th Volume of Advanced Materials Interfaces

AMI_표지논문.jpg

​​

  • Chae-yeong Hwang, Hyung Woo Kim, Hyungjun Yoon, and Dong SungKim, "Promoted migration of fibroblast cells on low aspect ratio isotropic nanopore surface by reduced maturation of focal adhesion at peripheral region", Colloids and Surfaces B: Biointerfaces, 2020, IF:5.999
    *This paper was selected as the back cover of the 195th Volume of Colloids and Surfaces B: Biointerfaces

2020_채영 (1).jpg

​​

  • Hyeonseok Han, Hyeonjun Hong, Sang Min Park, and Dong Sung Kim, "Metal–electrolyte solution dual-mode electrospinning process for in situ fabrication of electrospun bilayer membrane", Advanced Materials Interfaces, 2020, IF:6.389
    *This paper was selected as the back cover of the 20th issue in 7th Volume of Advanced Materials Interfaces

2020_AMI_Cover image (1).jpg

​​

  • Seongsu Eom, Sang Min Park, Hyeonjun Hong, Jinju Kwon, Sang-Rok Oh, Junesun Kim, and Dong Sung Kim, "Hydrogel-Assisted Electrospinning for Fabrication of a 3D Complex Tailored Nanofiber Macrostructure", ACS Applied Materials & Interfaces, 2020, IF:10.383

water%20mark_MIB_edited.png

​​

  • Andrew Choi, Hyungjun Yoon, Seon Jin Han, Ji-Ho Lee, In Hyeok Rhyou and Dong Sung Kim, "Rapid harvesting of stem cell sheets by thermoresponsive bulk poly(N-isopropylacrylamide) (PNIPAAm) nanotopography", Biomaterials Sciences, 2020, IF:7.59
    *This paper was selected as the front cover of the 6th issue in 7th Volume of Biomaterials Science
    **This paper was selected as part of the themed collection: Biomaterials Science Most Popular 2020

2020_이현.jpg

​​

  • Hyeonjun Hong, Jeongho Kim, Hoseong Cho, Sang Min Park, Mansik Jeon, Hong Kyun Kim, Dong Sung Kim, "Ultra-stiff compressed collagen for corneal perforation patch graft realized by in situ photochemical crosslinking", Biofabrication, 2020, IF:11.061

​​

  • Hyeonjun Hong and Dong Sung Kim, "Robust Topographical Micro-Patterning of Nanofibrillar Collagen Gel by In Situ Photochemical Crosslinking-Assisted Collagen Embossing", Nanomaterials, 2020, IF:5.719

2019

​​

  • Byeong-Ung Park, Sang Min Park, Kyoung-pil Lee, Seong Jin Lee, Yu Eun Nam, Han Sang Park, Seongsu Eom, Jeong-Ok Im, Dong sung Kim, and Hong-Kyun Kim, "Collagen immobilization on ultra-thin nanofiber membrane to promote in vitro endothelial monolayer formation", Journal of Tissue Engineering, 2019, IF:7.94

​​

  • Dohui Kim, Seongsu Eom, Sang Min Park, Hyeonjun Hong, and Dong Sung Kim, "A collagen gel-coated, aligned nanofber membrane for enhanced endothelial barrier function", Scientific Reports, 2019, IF:4.997

​​

  • Hyeonjun Hong, Sang Min Park, Dohui Kim, Sung Jea Park, and Dong Sung Kim, "Grayscale mask-assisted photochemical crosslinking for a dense collagen construct with stiffness gradient", Journal of biomedical materials research part B, 2019, IF:3.405

  • Sang Min Park, Kyoung-pil Lee, Man-Il Huh, Seongsu Eom, Byeong-ung Park, Ki Hean Kim, Dong Ho Park, Dong Sung Kim, and Hong Kyun Kim, "Development of an in vitro 3D choroidal neovascularization model using chemically induced hypoxia through an ultra-thin, free-standing nanofiber membrane", Materials Science and Engineering: C, 2019, IF:8.457

  • Hyeonjun Hong, Hyeonji Kim, Seon Jin Han, Jinah Jang, Hong Kyun Kim, Dong-Woo Cho, and Dong Sung Kim, "Compressed collagen intermixed with cornea-derived decellularized extracellular matrix providing mechanical and biochemical niches for corneal stroma analogue", Materials Science and Engineering: C, 2019, IF:8.457

  • Dasol Lee, Minkung Kim, Jeonghyun Kim, Hyeonjun Hong, Trevon Badloe, Dong Sung Kim and Junsuk Rho, "All-dielectric metasurface imaging platform applicable to laser scanning microscopy with enhanced axial resolution and wavelength selection", Optics Materials Express, 2019, IF:3.83

  • Andrew Choi, Kyoung Duck Seo, Hyungjun Yoon, Seon Jin Han, and Dong Sung Kim, "Bulk poly(N-isopropylacrylamide) (PNIPAAm) thermoresponsive cell culture platform: toward a new horizon in cell sheet engineering", Biomaterials Sciences, 2019, IF:7.59
    *This paper was selected as the front cover of the 6th issue in 7th Volume of Biomaterials Science

Biomaterials Science_front cover.png

  • Donghyeon Yoo, Seung-Chul Park, Seoulmin Lee, Jae-Yoon Sim, Insang Song, Dongwhi Choi, Hyuneui Lim, and Dong Sung Kim, "Biomimetic anti-reflective triboelectric nanogenerator for concurrent harvesting of solar and raindrop energies", Nano Energy, 2019, IF:19.069

Nano Energy 2019 (2).jpg
water%20mark_MIB_edited.png

  • Jaewon Yoo, Donghyeon Yoo, Seoulmin Lee, JaeYoon Sim, Woonbong Hwang, Dongwhi Choi, and Dong Sung Kim, "Extremely high and elongated power output from a mechanical mediator-assisted triboelectric nanogenerator driven by the biomechanical energy", Nano Energy, 2019, IF:19.069

Nano Energy 2019.jpg
water%20mark_MIB_edited.png

  • Jeong-Won Lee, Jonghyeon Jeong, Donghyeon Yoo, Kwangseok Lee, Seoulmin Lee, and Dong Sung Kim, Jae-Yoon Sim, Woonbong Hwang, "Pump drill-integrated triboelectric nanogenerator as a practical substitute for batteries of intermittently used devices", Nano Energy, 2019, IF:19.069

  • Handong Cho, Jihoon Chung, Gunsub Shin, Jae-Yoon Sim, Dong Sung Kim, Sangmin Lee, and Woonbong Hwang, "Toward sustainable output generation of liquid-solid contact triboelectric nanogenerators: The role of hierarchical structures", Nano Energy, 2019, IF:19.069

  • Donghyeon Yoo, Eun Yeong Go, Dongwhi Choi, Jeong-Won Lee, Insang Song, Jae-Yoon Sim, Woonbong Hwang, and Dong Sung Kim, "Increased Interfacial Area between Dielectric Layer and Electrode of Triboelectric Nanogenerator toward Robustness and Boosted Energy Output", Nanomaterials, 2019, IF:5.719

  • Sang Min Park, Seongsu Eom, Hyeonjun Hong, Jaeseung Yoon, Seong Jin Lee, Bum Chang Kim, Hyung Woo Kim, and Dong Sung Kim, "Reconstruction of in vivo-like in vitro model: Enabling technologies of microfluidic systems for dynamic biochemical/mechanical stimuli", Microelectronic Engineering, 2019, IF:2.662

2018

  • Kwangwok Lee, Jeong-won Lee, Kihwan Kim, Donghyeon Yoo, Dong Sung Kim, Sang min Lee, and Woonbong Hwang, "A Spherical Hybrid Triboelectric Nanogenerator for Enhanced Water Wave Energy Harvesting", Micromachines, 2018, IF:3.523

  • Sang Min Park, Seong Jin Lee, Jiwon Lim, Bum Chang Kim, Seon Jin Han, and Dong Sung Kim, "Versatile Fabrication of Size- and Shape-Controllable Nanofibrous Concave Microwells for Cell Spheroid Formation", ACS Appl. Mater. Interfaces, 2018, IF:10.384

  • Yeong-Jin Choi, Sung Jea Park, Hee-Gyeong Yi, Hyungseok Lee, Dong Sung Kim and Dong-Woo Cho, "Muscle-derived extracellular matrix on sinusoidal wavy surfaces synergistically promotes myogenic differentiation and maturation", Journal of Materials Chemistry B, 2018, IF:7.571
    *This paper was selected as the front cover of the 35th issue in 6th Volume of Journal of Materials Chemistry

Muscle-derived extracellular matrix on s

  • Hyeonjun Hong, Man-Il Huh, Sang Min Park, Kyoung-Pil Lee, Hong Kyun Kim, and Dong Sung Kim, "Decellularized corneal lenticule embedded compressed collagen: toward a suturable collagenous construct for limbal reconstruction", Biofabrication, 2018, IF:11.061

  • Sang Min Park, HyeMi Kim, Kwang Hoon Song, Seongsu Eom, HyoungJun Park, Junsang Doh, Dong Sung Kim, "Ultra-thin, aligned, free-standing nanofiber membranes to recapitulate multi-layered blood vessel/tissue interface for leukocyte infiltration study", Biomaterials,  2018, IF:15.304

  • Xin Ning, Xueju Wang, Yi Zhang, Xinge Yu, Dongwhi Choi, Ning Zheng, Dong Sung Kim, Yonggang Huang, Yihui Zhang, John A. Rodgers, "Assembly of Advanced Materials into 3D Functional Structures by Methods Inspired by Origami and Kirigami: A Review", Advanced Materials Interfaces, 2018, IF:6.389

  • Jiwon Lim, Andrew Choi, Hyung Woo Kim, Hyungjun Yoon, Sang Min Park, Chia-Hung Dylan Tsai, Makoto Kaneko, Dong Sung Kim, "Constrained Adherable Area of Nanotopographic Surfaces Promotes Cell Migration through the Regulation of Focal Adhesion via Focal Adhesion Kinase/Rac1 Activation", ACS Appl. Mater. Interfaces, 2018 , IF; 10.384

  • Sang Min Park, Seongsu Eom, Dongwhi Choi, Seon Jin Han, Sung Jea Park, Dong Sung Kim, "Direct fabrication of spatially patterned or aligned electrospun nanofiber mats on dielectric polymer surfaces", Chemical Engineering Journal, 2018, IF:16.744

  • Sang Min Park, Seongsu Eom, Wonkyoung Kim, Dong Sung Kim, "Role of grounded liquid collectors in precise patterning of electrospun nanofiber mats", Langmuir, 2018, IF:4.331

2017

  • Wonkyoung Kim, Changho Lee, Chulhong Kim, Dong Sung Kim, "Dual-mode reconfigurable focusing using the interface of aqueous and dielectric liquids", Lab on a Chip, 2017, IF:7.517 
    *This paper was selected as the back cover of the 23th issue in 17th Volume of Lab on a Chip

C7LC00759K_페이지_01.png

  • Seongsu Eom, Sang Min Park, Seon Jin Han, Joon Wan Kim, Dong Sung Kim, "One-step fabrication of a tunable nanofibrous well insert via electrolyte-assisted electrospinning", RSC Advances, 2017, IF:4.036

  • Dongwhi Choi, Yu-Hsiang Tsao, Che-Min Chiu, Donghyeon Yoo, Zong-Hong Lin, Dong Sung Kim, "A Smart Pipet Tip: Triboelectricity and Thermoelectricity Assisted in situ Evaluation of Electrolyte Concentration", Nano Energy, 2017, IF:19.069

Nano Energy 2017.jpg
water%20mark_MIB_edited.png

  • Wonkyoung Kim, Hee Chan Yang, Dong Sung Kim, "Wide and fast focus-tunable dielectro-optofluidic lens via pinning of the interface of aqueous and dielectric liquids", Optics Express, 2017, IF:3.833

  • Dongwhi Choi, Do Wan Kim, Donghyeon Yoo, Kyoung Je Cha, Moonwoo La, Dong Sung Kim, "Spontaneous occurrence of liquid-solid contact electrification in nature: Toward a robust triboelectric nanogenerator inspired by the natural lotus leaf", Nano Energy, 2017, IF:19.069

  • Jeong Su Lee, Hyeonjun Hong, Sung Jae Park, Seong Jin Lee, Dong Sung Kim, "A simple fabrication process for stepwise gradient wrinkle patterns with spatially controlled wavelength based on sequential oxygen plasma treatment", Microelectronic Engineering,  2017, IF:2.662

  • Andrew Choi, Kyoung Duck Seo, Do Wan Kim, Bum Chang Kim, Dong Sung Kim, "Recent advances in engineering microparticles and their nascent utilization in biomedical delivery and diagnostic applications", Lab on a Chip, 2017, IF:7.517

  • Seonga An, Jiwon Lim, Dongwhi Choi, Hyeonjun Hong, Hyung Woo Kim, Sang Min Park, Jong Won Rhie, Dong Sung Kim, "Fabrication of polystyrene-based multi-well screening platform for micrometer-scale surface topographies promoting stem cell functions", Microelectronic Engineering, 2017, IF:2.662

  • Hyung Woo Kim, Jiwon Lim, Jong Won Rhie, Dong Sung Kim, "Investigation of effective shear stress on endothelial differentiation of human adipose-derived stem cells with microfluidic screening device", Microelectronic Engineering, 2017, IF:2.662

  • Donghyeon Yoo, Dongwhi Choi, Dong Sung Kim, "Comb-shaped electrode-based triboelectric nanogenerators for bi-directional mechanical energy harvesting", Microelectronic Engineering, 2017, IF:2.662

  • Dongwhi Choi, Jaewon Yoo, Sang Min Park, Dong Sung Kim, "Facile and cost-effective fabrication of patternable superhydrophobic surfaces via salt dissolution assisted etching", Applied Surface Science, 2017, IF:7.392

  • Kyoung Je Cha, Sun-Young Kong, Ji Soo Lee, Hyung Woo Kim, Jae-Yeon Shin, Moonwoo La, Byung Woo Han, Dong Sung Kim and Hyun-Jung Kim, "Cell density-dependent differential proliferation of neural stem cells on omnidirectional nanopore-arrayed surface", Scientific Reports, 2017, IF 4.997
    *This paper was selected as one of the Top 100 Read Cell Biology Papers For Scientific Reports In 2017

2016

  • Hyung Woo Kim, Seonjin Han, Wonkyoung Kim, Jiwon Lim, Dong Sung Kim, "Modulating wall shear stress gradient via equilateral triangular channel for in situ cellular adhesion assay", Biomicrofluidics, 2016, IF:3.258

  • Wonkyoung Kim and Dong Sung Kim, "Gradient shadow pattern reveals refractive index of liquid", Scientific Reports, 2016, IF4.997

  • Kyoung Je Cha, Jiwon Lim, Moon-He Na, and Dong Sung Kim, "Physically microstriped-nanoengineered polystyrene surface (PMS-NPS) for regulating cell attachment and alignment fabricated by nano-injection molding", Microelectronic Engineering,, 2016, IF:2.662

  • Jong Hyun Kim, Hyung Woo Kim, Kyoung Je Cha, Jiyou Han, Yu Jin Jang, Dong Sung Kim, and Jong-Hoon Kim, "Nanotopography Promotes Pancreatic Differentiation of Human Embryonic Stem Cells and Induced Pluripotent Stem Cells", ACS Nano, 2016, IF:18.027

  • Hyeonjun Hong, Sung Jea Park, Seon Jin Han, Jiwon Lim, Dong Sung Kim, "Aquatic flower-inspired cell culture platform with simplified medium exchange process for facilitating cell-surface interaction studies", Biomedical Microdevices,  2016, IF 3.783

  • Jaideep Katuri, Kyoung Duck Seo, Dong Sung Kim, Samuel Sanchez, "Artificial micro-swimmers in simulated natural environments", Lab on a Chip, 2016, IF:7.517

  • Kyoung Duck Seo, Andrew Choi, Junsang Doh, Dong Sung Kim, "Synthesis of Poly(N-isopropylacrylamide) Janus Microhydrogels for Anisotropic Thermo-Responsiveness and Organophilic/Hydrophilic Loading Capability", Journal of Visualized Experiments,, 2016, IF:1.424

  • Minyung Song, Jiyoung Lee, Kyung Duck Seo, Dong Sung Kim and Suk Tai Chang, “Synthesis of Hydrogel Hollow Capsules on a Superhydrophobic Surface”, Polymer-Korea, 2016, IF:0.3

                    2015

  • Dongwhi Choi, Donghyeon Yoo, Dong Sung Kim, "One-Step Fabrication of Transparent and Flexible Nanotopographical-Triboelectric Nanogenerators via Thermal Nanoimprinting of Thermoplastic Fluoropolymer", Advanced Materials, 2015, IF:32.086

adv choi.PNG

  • Horim Lee, Dongwhi Choi, Dong Sung Kim, Geunbae Lim, "Capacitive Control of Spontaneously Induced Electrical Charge of Droplet by Electric Field-Assisted Pipetting", Nano-Micro Letters, 2015, IF:23.655

  • Dongwhi Choi, Donghyeon Lee, Dong Sung Kim, "A Simple Approach to Characterize Gas-Aqueous Liquid Two-phase Flow Configuration Based on Discrete Solid-Liquid Contact Electrification", Scientific Reports, 2015, IF:4.997

  • Kyoung Duck Seo, Dong Sung Kim, Samuel Sanchez, "Fabrication and Application of Complex-Shaped Microparticles via Microfluidics", Lab on a Chip, 2015, IF:7.517

  • Dongwhi Choi, Sangmin Lee, Sang Min Park, Handong Cho, Woonbong Hwang, and Dong Sung Kim, "Energy Harvesting Model of Moving Water inside Tubular System and Its Application of Stick Type Compact Triboelectric Nanogenerator", Nano Research, 2015, IF:10.239

  • Ae Ryang Jung, Richard Y. Kim, Hyung Woo Kim, Kshitiz Raj Shrestha, Seung Hwan Jeon, Kyoung Je Cha, Yong Hyung Park, Dong Sung Kim, and Ji Youl Lee, "Nanoengineered polystyrene surfaces with nanopore array pattern alters cytoskeleton organization and enhances induction of neuronal differentiation of human adipose derived stem cells", Tissue Engineering Part A, 2015, IF:4.08

  • Minjae Kim, Taewan Kim, Dong Sung Kim, Wan Kyun Chung , "Curved Microneedle Array-Based sEMG Electrode for Robust Long-Term Measurements and High Selectivity", Sensors, 2015, IF:3.847

  • Dongwhi Choi, Andrew Choi, Dong Sung Kim, "A capillary-based preconcentration device by using ion concentration polarization through cation permselective membrane coating", International Journal of Precision Engineering and Manufacturing, 2015, IF:2.041

  • Moonwoo La, Sang Min Park, Wonkyoung Kim, Changho Lee, Chulhong Kim, and Dong Sung Kim, "Injection Molded Plastic Lens for Relay Lens System and Optical Imaging Probe", International Journal of Precision Engineering and Manufacturing, 2015, IF:2.041

  • Kwang Hoon Song, Sung Jea Park, Dong Sung Kim, Junsang Doh, "Sinusoidal wavy surfaces for curvature-guided migration of T lymphocytes", Biomaterials, 2015, IF:15.304

  • Kyoung Duck Seo, Byung Kook Kwak, Samuel Sánchez, Dong Sung Kim, "Microfluidic-Assisted Fabrication of Flexible and Location Traceable Organo-Motor", IEEE Transactions on NanoBioscience, 2015, IF:3.206

  • Sang Min Park, Dong Sung Kim, "Electrolyte-assisted Electrospinning for a self-assembled, free-standing nanofiber membrane on a curved surface", Advanced Materials, 2015, IF:32.086

* This paper was selected as the inside front cover of the 10th issue in 27th Volume of Advanced Materials

Park_et_al-2015-Advanced_Materials (1).p

  • Moonwoo La, Sang Min Park, and Dong Sung Kim, "Centrifugal multiplexing fixed-volume dispenser (C-MUFID) on a plastic lab-on-a-disk for parallel biochemical single-end-point assays", Biomicrofluidics, 2015, IF:3.258

                    2014

  • Kyoung Je Cha, Taewan Kim, Sung Jea Park, and Dong Sung Kim, "Simple and cost-effective fabrication of solid biodegradable polymer microneedle arrays with adjustable aspect ratio for transdermal drug delivery using acupuncture microneedles", Journal of Micromechanics and Microengineering, 2014, IF:2.282

  • Young Ae Choi, Dong Sung Kim, Hong In Shin, Eui Kyun Park, "SMOC1-induced osteoblast differentiation involves enhanced proliferation of human bone marrow mesenchymal stem cells", Tissue Engineering and Regenerative Medicine, 2014, IF:4.451

  • Kyoung Duck Seo, Dong Sung Kim, "Microfluidic synthesis of thermo-responsive poly(N-isopropylacrylamide)-poly(ethylene glycol) diacrylate microhydrogels as chemo-embolic microspheres", Journal of Micromechanics and Microengineering, 2014, IF:2.282

  • Dongwhi Choi, Dong Sung Kim, "A zeta-pipet tip to reduce the spontaneously induced electrical charge of a dispensed aqueous droplet", Langmuir, 2014, IF:4.331

  • Kyoung Je Cha, Moon-Hee Na, Hyung Woo Kim, and Dong Sung Kim, "Nano Petri dishes: A new polystyrene platform for studying cell-nanoengineered surface interactions", Journal of Micromechanics and Microengineering, 2014, IF:2.282

  • Moonwoo La, Wonkyoung Kim, Wonseok Yang, Hyung Woo Kim, and Dong Sung Kim, "Design and numerical simulation of complex flow generation in a microchannel by magnetohydrodynamic (MHD) actuation", International Journal of Precision Engineering and Manufacturing, 2014, IF:2.041

  • Kyoung Duck Seo, Jang Min Park, Hyeonsoo Jeong, Dong Sung Kim, "An experimental investigation of mixing of carbon nanotube/polymer composite in a batch-type screw mixer", Microsystem Technologies, 2014, IF:2.041

                    2013

  • Kyoung Duck Seo, Junsang Doh, and Dong Sung Kim, "One-Step Microfluidic Synthesis of Janus Microhydrogels with Anisotropic Thermo-Responsive Behavior and Organophilic/Hydrophilic Loading Capability", Langmuir, 2013, IF:4.331

  • Sung Jea Park, Moonwoo La, Kyoung Je Cha, and Dong Sung Kim, "Development of contaminant-free and effective micro-mixing methods based on non-contact dispensing system", Microelectronic Engineering, 2013, IF:2.662

  • Bong-Kee Lee, Sung Jea Park and Dong Sung Kim, "Fabrication of ionic polymer actuator with graphene nanocomposite electrodes and its characterization", Current Applied Physics, 2013, IF:2.856

  • Min Jin Choi, Kyoung Je Cha, Hyung Woo Kim, Moon-Hee Na, Bong-Kee Lee, Woon Bong Hwang, and Dong Sung Kim, "Microchamber/nanodimple polystyrene surfaces constructing cell aggregates fabricated by thermoset mold-based hot embossing", Microelectronic Engineering, 2013, IF:2.662

  • Sung Jea Park,Bong-Kee Lee, Moon-Hee Na,Dong Sung Kim, "Melt-spun shaped fibers with enhanced surface effects: Fiber fabrication, characterization, and application to woven scaffolds", Acta Biomaterialia, 2013, IF:10.633

  • Hyeonsoo Jeong, Moonwoo La, Sung Jea Park, and Dong Sung Kim, "Roll-to-flat texturing system with infrared preheating for manufacturing a microfluidic device", Microelectronic Engineering, 2013, IF:2.662

  • Dongwhi Choi, Horim Lee, Do Jin Im, In Seok Kang, Geunbae Lim, Dong Sung Kim, Kwan Hyoung Kang, "Spontaneous electrical charging of droplets by conventional pipetting", Scientific Reports, 2013, IF:4.997

  • Kyoung Je Cha, Jung Min Hong, Dong-Woo Cho, and Dong Sung Kim, "Enhanced osteogenic fate and function of MC3T3-E1 cells on nanoengineered polystyrene surfaces with nanopillar and nanopore arrays", Biofabrication, 2013, IF:11.061

  • Hyung Woo Kim, Sung Jea Park, Bong-Kee Lee, Dong Sung Kim, "Versatile graphene nanocomposite microheater patterning for various thermoplastic substrates based on capillary filling and transfer molding", Applied Physics Letters, 2013, IF:3.971

  • Moonwoo La, Sung Jea Park, Hyung Woo Kim, Jae Jun Park, Ki Tak Ahn, Sung Moo Ryew, and Dong Sung Kim, "A Centrifugal Force-based Serpentine Micromixer (CSM) on a Plastic Lab-on-a-disk for Biochemical Assays", Microfluidics and Nanofluidics, 2013, IF:3.09

                    2012

  • Kwang-Sook Park, Kyung Je Cha, In-Bo Han, Dong-Ah Shin, Dong-Woo Cho, Soo Hong Lee, and Dong Sung Kim, "Mass-producible Nano-featured Polystyrene Surfaces for Regulating the Differentiation of Human Adipose-derived Stem Cells", Macromolecular Bioscience, 2012, IF:5.859

* This paper was selected as the front cover of the 11th issue in 12th Volume of Macromolecular Bioscience.

mcontent (1).gif

  • Sunae Hwang, Byung Kook Kwak, Jaehwi Lee, Dong Sung Kim, Suk Tai Chang, JuHyun Park, Jonghwi Lee, "Janus Hydrogel Particles for Arterial Embolization and Their Aggregation Behavior", Macromolecular Research, 2012, IF:2.127

  • Min Jin Choi, Ju Young Park, Kyoung Je Cha, Jong-Won Rhie, Dong-Woo Cho, and Dong Sung Kim, "Micropattern array with gradient size (uPAGS) plastic surfaces fabricated by PDMS (polydimethylsiloxane) mold-based hot embossing technique for investigation of cell-surface interaction", Biofabrication, 2012, IF: 11.061

                    2011

  • Kyung Je Cha, Kwang-Sook Park, Sun-Woong Kang, Byung-Hyun Cha, Bong-Kee Lee, In-Bo Han, Dong-Ah Shin, Dong Sung Kim, and Soo Hong Lee, "Effect of Replicated Polymeric Substrate with Lotus Surface Structure on Adipose-Derived Stem Cell Behaviors", Macromolecular Bioscience, 2011, IF: 5.859.

   * This paper was selected as the front cover of the 10th issue in 11th Volume of Macromolecular Bioscience.

Cha_et_al-2011-Macromolecular_Bioscience

  • Kyoung Je Cha and Dong Sung Kim, "A Portable Pressure Pump for Microfluidic Lab-on-a-Chip Systems using a Porous Polydimethylsiloxane (PDMS) Sponge", Biomedical Microdevices, 2011, IF: 3.783

  • Seung Ho Paek, Wonseok Yang, Jong Sun Kim, Chul Jin Hwang, Young Ki Choi and Dong Sung Kim, "Microfabrication of dual-opposite electrodes inside a microchannel by means of multiphase laminar Flow with density difference", Micro and Nano Letters, 2011, IF: 0.98

  • Kyungsup Han, Sona Lee, Kyoung Duck Seo, Sung-Up Choi, Jonghwi Lee, Jaehwi Lee, Byung Kook Kwak, Hae-Jin Choi and Dong Sung Kim, "Effect of Flow Rates on Generation of Monodisperse Clay-Poly(N-isopropylacrylamide) Embolic Microspheres Using Hydrodynamic Focusing Microfluidic Device", Japanese Journal of Applied Physics, 2011, IF: 1.491

  • Kyung Je Cha, Bong-Kee Lee and Dong Sung Kim, "Nanofabrication of Nickel Stamp for Replication of Polymer Multilevel Nanolens Arrays via Modified Two-step Anodization Process", Japanese Journal of Applied Physics, 2011, IF: 1.491

  • Kyung Je Cha, Bong-Kee Lee and Dong Sung Kim, "Fabrication of Polymer Micropyramid/Nanolens Combined Structures Using Microstructured Nanodimpled Aluminum Stamp", Japanese Journal of Applied Physics,2011, IF: 1.491

  • Bong-Kee Lee, Jang Min Park, Dong Sung Kim and Tai Hun Kwon, "A Simple Fabrication and Integration Technique of Microlens for Microfluidic Lab-on-a-Chip by Overflow of UV Resin through Holes", Current Applied Physics, 2011, IF: 2.856

                    2010

  • Bong-Kee Lee, Jong Hyun Kim, Dong Sung Kim, Suk Sang Chang and Tai Hun Kwon, "Microfabrication of a Nickel Mold Insert by a Modified Deep X-ray Lithography Process and Its Application to Hot Embossing", Microelectronic Engineering, 2010, IF: 2.662

  • Jihoon Yeo, Jejun Ryu, Bong-Kee Lee, Euihyeon Byeon, Tai Hun Kwon and Dong Sung Kim, "Theoretical and experimental characterization of wettability of various nanolens arrayed polymer surfaces replicated with nanodimpled aluminum mold insert", Microsystem Technologies, 2010, IF: 2.0.41

  • Jihoon Yeo and Dong Sung Kim, "The Effect of the Aspect Ratio on the Hydrophobicity of Microstructured Polydimethylsiloxane (PDMS) Robust Surfaces", Microsystem Technologies, 2010, IF: 2.041

  • Jong Sun Kim, Dong Sung Kim, Jeong Jin Kang, Jong Deok Kim and Chul Jin Hwang, "Replication and Comparison of Concave and Convex Microlens Arrays of Light Guide Plate for Liquid Crystal Display in Injection Molding", Polymer Engineering and Science, 2010, IF: 2.573

  • Wonseok Yang, Young Gyu Nam, Bong-Kee Lee, Kyungsup Han, Tai Hun Kwon and Dong Sung Kim, "Fabrication of a Hydrophilic Poly(dimethylsiloxane) Microporous Structure and Its Application to Portable Microfluidic Pump", Japanese Journal of Applied Physics, 2010, IF: 1.491

* The figure of this paper was selected as a cover image of this issue.

  • Seung Ho Paek, Young Ki Choi and Dong Sung Kim, "Selective Microfabrication of Silver Electrodes inside a Microchannel by Multiphase Laminar Flow with Density Difference", Microelectronic Engineering, 2010, IF: 2.662

  • Jihoon Yeo, Min Jin Choi and Dong Sung Kim, "Robust Hydrophobic Surfaces with Various Micropillar Arrays", Journal of Micromechanics and Microengineering, 2010, IF: 2.282

                    2009

  • Seung-Jae Lee, In Hwan Lee, Jeong Hun Park, So-Jung Gwak, Jong-Won Rhie, Dong-Woo Cho, Tae Jo Ko and Dong Sung Kim, "Development of a Hybrid Scaffold and a Bioreactor for Cartilage Regeneration", Chinese Science Bulletin, 2009, IF: 10.996

  • Dong Sung Kim, Bong-Kee Lee, Jihoon Yeo, Min Jin Choi, Wonseok Yang and Tai Hun Kwon, "Fabrication of PDMS Micro/Nano Hybrid Surface for Increasing Hydrophobicity", Microelectronic Engineering, Chinese Science Bulletin, 2009, IF: 2.662

  • Dong Sung Kim, Dong Sung (Danny) Kim, Kyungsup Han and Wonseok Yang, "An Efficient 3-Dimensional Hydrodynamic Focusing Microfluidic Device by means of Locally Increased Aspect Ratio", Microelectronic Engineering, 2009, IF: 2.662

  • Sung Hwan Choi, Dong Sung Kim, and Tai Hun Kwon, "Microinjection Molded Disposable Microfluidic Lab-on-a-Chip for Efficient Detection of Agglutination", Microsystem Technologies, 2009, IF: 2.041

                    2008

  • Dong Sung Kim, Jong Sun Kim, Young Bae Ko, Jong Deok Kim, Kyung Hwan Yoon and Chul Jin Hwang, "Experimental Characterization of Transcription Properties of Microchannel Geometry Fabricated by Injection Molding Based on Taguchi Method", Microsystem Technologies, 2008, IF: 2.041

  • Jang Min Park, Dong Sung Kim, Tae Gon Kang and Tai Hun Kwon, "Improved Serpentine Laminating Micromixer with Enhanced Local Advection", Microfluidics and Nanofluidics, 2008, IF: 3.09

  • Bong-Kee Lee, Chul Jin Hwang, Dong Sung Kim and Tai Hun Kwon, "Replication Quality of Flow-through Microfilters in Microfluidic Lab-on-a-Chip for Blood Typing by Microinjection Molding", Journal of Manufacturing Science and Engineering -Transactions of the ASME, 2008, IF: 3.952

                    2007

  • Dong Sung Kim, Han Ul Lee, Nam Hyo Kim, Kun-Hong Lee, Dong-Woo Cho and Tai Hun Kwon, "Fabrication of Microchannel Containing Nanopillar Arrays using Micromachined AAO (Anodic Aluminum Oxide) Mold", Microelectronic Engineering, 2007,    IF: 2.662

  • Hyun Sup Lee, Dong Sung Kim and Tai Hun Kwon, "UV Nano Embossing for Polymer Nano Structures with Non-Transparent Mold Insert", Microsystem Technologies, 2007, IF: 2.041

  • Dong Sung Kim, Hyun Sup Lee, Junghyun Lee, Sungjoo Kim, Kun-Hong Lee, Wonkyu Moon and Tai Hun Kwon, "Replication of High-Aspect-Ratio Nanopillar Array for Biomimetic Gecko Foot-Hair Prototype by UV Nano Embossing with Anodic Aluminum Oxide Mold", Microsystem Technologies, 2007, IF: 2.041

                    2006

  • Seung Mo Lee, Hyun Sup Lee, Dong Sung Kim and Tai Hun Kwon, "Fabrication of Hydrophobic Films Replicated from Plant Leaves in Nature", Surface & Coatings Technology, 2006, IF: 4.865

  • Dong Sung Kim and Tai Hun Kwon, "Modeling, Analysis and Design of Centrifugal Force Driven Transient Filling Flow into Rectangular Microchannel", Microsystem Technologies, 2006, IF: 2.041

  • Dong Sung Kim, Se Hwan Lee, Chong H. Ahn, Jae Y. Lee and Tai Hun Kwon, "Disposable Integrated Microfluidic Biochip for Blood Typing by Plastic Microinjection Moulding", Lab on a Chip, 2006, IF: 7.517

* This paper was highlighted and introduced in Magazine; Chemical Technology (May 23, 2006; Vol. 3 Issue 6, pp. T23, 2006) published by Royal Society of Chemistry and the paper is now freely accessed in the website of Lab on a Chip.

  • Seok Woo Lee, Dong Sung Kim, Seung S. Lee and Tai Hun Kwon, "A Split and Recombination Micromixer Fabricated in a PDMS Three-Dimensional Structure", Journal of Micromechanics and Microengineering, 2006, IF: 2.282

  • Dong Sung Kim, Hyun Sup Lee, Bong-Kee Lee, Sang Sik Yang, Tai Hun Kwon and Seung S. Lee, "Replications and Analysis of Microlens Array Fabricated by a Modified LIGA Process", Polymer Engineering and Science, 2006, IF: 2.573

  • Dong Sung Kim and Tai Hun Kwon, "Modeling, Analysis and Design of Centrifugal Force-Driven Transient Filling Flow into a Circular Microchannel", Microfluidics and Nanofluidics, 2006, IF: 3.09

                    2005

  • Dong Sung Kim, Se Hwan Lee, Tai Hun Kwon and Chong H. Ahn, "A Serpentine Laminating Micromixer Combining Splitting/Recombination and Advection", Lab on a Chip, 2005, IF: 7.51

                    2004

  • Bong-Kee Lee, Dong Sung Kim and Tai Hun Kwon, "Replication of Microlens Arrays by Injection Molding", Microsystem Technologies, 2004, IF: 2.041

  • Dong Sung Kim, In Hwan Lee, Tai Hun Kwon and Dong-Woo Cho, "A Barrier Embedded Kenics Micromixer", Journal of Micromechanics and Microengineering, 2004, IF: 2.282

* This paper was introduced in the textbook written by V. Hessel, H. Lowe, A. Muller and G. Kolb (Chemical Micro Process Engineering: Processing, Applications and Plants, Wiley,

                    2003

  • Dong Sung Kim, Sang Sik Yang, Sung-Keun Lee, Tai Hun Kwon and Seung S. Lee, "Physical Modeling and Analysis of Microlens Formation Fabricated by a Modified LIGA Process", Journal of Micromechanics and Microengineering, 2003, IF: 2.282

  • Dong Sung Kim, Kwang-Cheol Lee, Tai Hun Kwon, and Seung S. Lee, "Micro-channel Filling Flow Considering Surface Tension Effect", Journal of Micromechanics and Microengineering, 2003, IF: 2.282

bottom of page